Agricultural Products
Request A Callback
[gravityform id="1" title="false" description="false" ajax="true"]
Agricultural products suppliers
Butt Wall
- Can be made 18 or 20 inches (457 or 508 mm) high and 4.8 or 6 meters long. 5.5 in / 140 mm thick
- Rounded edges to protect cattle and they come with built in lifting eye sockets
- Lifting eye sockets are included making them easier to lift into place and to move around
- Smooth finish
- Below you can see our butt walls on a Tipperary farm
Cubicle Base
- Can be 7’ or 7’ 6” in length
- 3’ 9” width
- Height is 10” tapering to 8” for drainage
- Wide recesses along base allow for easy
movement with forks
J Shape Feed Barrier Trough
- Height: 37 in / 940 mm and 25 in / 635 mm – high side and low side
- Width: 21 in / 530 mm and 34 in / 860 mm – base and top
- 7.8 ft (7’ 10”) / 2400 mm length
- 1.5 ton
- Wide recesses at the base allow easy maneuverability with forks
- End pieces available that fit easily without the need the bolts or fixings
Heavy Duty L Shape Feed Barrier Trough
- Our L shaped barrier has thick wals walls and is reinforced with steel and fibre mesh. This enables it to withstand aggressive use including the impact of tractor wheels
- You eill note that there is no fall out in the back wall. It is straight
- Our heavy duty L Shape barrier’s dimensions are as follows:
- Height of 915 mm ( 37 inches ) length is 2400 mm (94 ” ) and width is
840 mm(34 ” ) - They weigh 1.5 tons each
- They have a wide recess to make them easy to move. They can be easily lifted with the forks of a tractor
Low J Shape Feed Barrier Trough for Weanlings and Calves
- Height: 27 in / 690 mm and 20 in / 510 mm – high side and low side
- Width 20 in / 510 mm and 37 in / 940 mm – base and top
- 7.8 ft (7’ 10”) / 2400 mm Length
- 1.2 ton
- Wide recesses at the base allow easy
maneuverability with forks - End pieces available that fit easily without the need the bolts or fixings
Regular Slurry Channels
- Channels fit together with complementary grooved sides. We also recommend a sealer like Sikafkex to seal the channel joints
- Length: 2.4 m / 7 ft 10 in
- Width: 1.2 m / 3 ft 11 in
- Height: 1.1 m / 3 ft 7 in
- Wall thickness: 228 mm / 9 in
- Weight: 1.2 ton
- There is a smooth surface finish to aid slurry flow
- We supply a diagonally slatted lid to go with our
channels. Perfect for use with a scraper - Lifting sockets are built into both channels
and lids for ease of lifting and lifting loops are provided
T Joint for Heavy Duty Slurry Channels
- Also available: left-hand & right-hand corners
- Lifting sockets are built into all pieces for ease of lifting and lifting loops are provided
- Corner pieces and edges of T-junctions are rounded to ensure easy flow
Rainwater Harvesting Tank 1700 Gallon
For rainwater harvesting, effluent collection etc.
- Length & Width: 6’ 4” / 1940 mm
- Height: 9’ 10” / 3010 mm
- Walls are 3.5 in / 85 mm thick
- Weight excl. lid is 5 ton
- Lids are 6’ 5” x 6’ 5” / 1.95 m x 1.95 m
- Solid lids are 6 inches / 152mm thick and weigh 700 kg
- Slatted lids 10 inches / 254mm thick and weigh 1000 kg
- Four lifting loops and sockets for lifting eyes are included for easy manoeuvre
- Lids have a 30 x 30 in / 76 x 76 cm inspection cover
Sheep Dip Tank
- Volume: 340 gl
- Weight: 2 ton
- Length: 9’ 8” / 2.95 m
- Depth: 4’ 10”/ 1.47 m
- Width: 2’ 3” / 69 cm at the top
- 1’ 8” / 50 cm at the base
- This tapering can save the amount of liquid used
- Walls are 4 in / 101 mm thick. Floors are 6 in / 152 mm thick. Fully reinforced
- 7 steps from base to exit
- All edges are rounded to prevent injury to the sheep
- We can also supply a lid on request
- Lifting eyes and loops are provided for ease of installation on both the dip tank and lid
100 Gallon Outdoor Water Trough
- Height: 1’ 8” / 508 mm
- Length: 6’ 3” / 1906 mm
- Width: 2’ 10” / 864 mm
- Weight: 600 kg
- All our troughs are fully reinforced with rounded edges, and top filled for less maintenance
150 Gallon Outdoor Water Trough
- Height: 2’ 3” / 686 mm
- Length: 6’ 3” / 1.9 m
- Width: 3’- / .914 mm
- Weight: 800 kg
- All our troughs are fully reinforced with rounded edges, and top filled for less maintenance
Sheep Drinking 60 Gallon Trough
- Height: 1’ 9” / 535 mm
- Length: 77 in (6’ 3”) / 1960 mm
- Width: 34 in / 596 mm
- Weight: 250 kg
L Shape Bunker Dividing Walls
- Holes are incorporated for both top or fork lifting
- Can be manufactured with or without a hee
- This is the strongest wall we produce
- 1.2 m x 1.8 m. base with heel
- 1.2 m x 1.6 m. base without heel
- Base: 20 cm / 8 inches thick
- 10 ft / 3 metre high
- 2,500 kg
- 8 ft / 2.4 metre high
- 2,200 kg
10 Foot A shape Bunker Dividing Wall
- 10 ft / 3 metre high
- 2,620 kg
- 1.2 m x 1.2 m. base
Cattle Footbath
- 9’ 9” long x 3’ 6” wide
- Bath is 1 foot high with a bath depth of 8 inches
- Floor and walls are 4 inches thick
- Weighs 1,300kg
- The drainage hole is 4 inches in diameter
- Rounded edges to protect cattle
- Can not be supplied with a grooved floor if mats are not intended to be used
- Bung enables rapid emptying and cleaning
- Lifting Sockets are fitted on enable each of handling
- Optional Steel Side Rails are available with heavy duty brackets to affix rails to the bath
Cubicle Base End Wall
- Can be 7’ or 7’ 6” in length
- We can also make special orders with 6’ 6” and 8’ 6” lengths
- 3’ 9” Width
- Height is 10” tapering to 8” for drainage
- Wide recesses along base allow for easy
movement with forks
Low L Shape Feed Barrier Trough
- Height: 2 ft / 610 mm
- Length: 7’ 10.5” / 2400 mm
- Width: 2’ 6” / 765 mm
- Weight: 1.3 tons
- Wide recesses at the base allow easy
maneuverability with forks - End pieces available that fit easily without the need of bolts or facings
U Shape Feed Barrier Trough
- 88 mm diameter holes in the floor allow for pipes to be inserted to install T frames, enabling fencing wire be run along both sides of the trough
- Height: 25 in / 635 mm
- Length: 94 in / 2387 mm
- Width: 69 in / 1752 mm
- Width inside channel: 59 in / 1498 mm
- Weight: 2 ton
- Recesses on side allow for easy manoeuvrability with forks or straps
- End Pieces available to fit easily without need for bolts or fittings
Mini Slurry Channels
- Channels fit together with complementary grooved sides. We also recommend a sealer like Sikafkex to seal the channel joints
- Length: 2000 mm / 6 ft 7 in
- Width: 675 mm / 2ft 3 in
- Height: 575mm / 1 ft 11 in
- Weight: 900 kg
- There is a smooth surface finish to aid slurry flow
- We supply a diagonally slatted lid to go with our
channels
Lids are:
- Length: 2000 mm / 6 ft 7 in
- Width: 690 mm / 2 ft 3 in
- Height: 175 mm / 7 in
- Weight; 400 kg
- Lifting sockets are built into both channels
and lids for ease of lifting and lifting loops are provided
End Pieces for Slurry Channels
- End pieces are available for our heavy-duty and mini slurry channels
- Lifting sockets are built into all pieces for ease of lifting and lifting loops are provided
Lego Security Block
- Length: 1400 mm
- Height: 700 mm
- Width: 680 mm
- Weight: 1.6 ton
- Can be stacked. Lump’s dimensions are: 200 x 200 x 100 mm
Rainwater Harvesting Tank 850 Gallon
For rainwater harvesting, effluent collection etc.
- Length & Width: 5’ 10” / 1775 mm
- Height: 5’ 4” / 1625 mm
- Walls are 3.5 in / 85 mm thick
- Weight excl. lid is 2.7 ton
- Lids are 6’ 5” x 6’ 5” / 1.95 m x 1.95 m
- Solid lids are 6 inches / 152mm thick and weigh 700 kg
- Slatted lids 10 inches / 254mm thick and weigh 1000 kg
- Four lifting loops and sockets for lifting eyes are included for easy manoeuvre
- Lids have a 30 x 30 in / 76 x 76 cm inspection cover
Rainwater Harvesting Tank Slatted Lid
- Lids are 6’ 5” x 6’ 5” / 1950 mm x 1950 mm
- Slatted lids 10 inches / 254 mm thick and weigh 1000 kg
- Four lifting loops and sockets for lifting eyes are included for easy manoeuvre
- Lids have a 30 x 30 in / 760 x 760 mm inspection cover
Rainwater Harvesting Tank – Solid Lid
- Lids are 6’ 5” x 6’ 5” / 1950 mm x 1950 mm
- Solid lids are 6 inches / 152 mm thick and weigh 700 kg
- Four lifting loops and sockets for lifting eyes are included for easy manoeuvre
- Lids have a 30 x 30 in / 760 x 760 mm inspection cover
300 Gallon Outdoor Water Trough
- Height: 2’ 8” / 813 mm
- Length: 7’ 10” / 2400 mm
- Width: 4’- / 1220 mm
- Weight: 1600 kg
- All our troughs are fully reinforced with rounded edges, and top filled for less maintenance
500 Gallon Outdoor Water Trough
- Height: 2’ 8” / 813 mm
- Length: 8’ 6” / 2600 mm
- Width: 5’ 4” / 1626 mm
- Weight: 2000 kg
- All our troughs are fully reinforced with rounded edges, and top filled for less maintenance
Indoor 100 Gallon Trough
- Height: 2’ 6” / 762 mm
- Length: 7’ 1” / 2160 mm
- Width: 2’- / 610 mm
- Weight: 750 kg
- All our troughs are fully reinforced with rounded edges, and top filled for less maintenance
Prestressed Wall Panels
- Prestressed walls are rapidly rising in popularity
as a convenient alternative to shuttering,
blocklaying or plastering - The walls contain prestressed steel cables for strength. The panels slot into each other with
tongue and groove joints and are placed between vertical steel columns (RSJs) - Lifting inserts are placed in the panels to aid installation so they are fast and easy to install and can be repositioned or removed when required
- The panels can be customized from 1 to 1.5 m high and in lengths up to 6.1m
- The walls are 140mm / 5.5” thick